Chrysler small block, complete turn key motor/trans/datalogger. Ran 8.51@154mph in 1740lbs Altered.
360+0.040" Hilborn mech methanol injected+ 80A enderle pump, W2 alloy batten race heads (solid no water), roller cam,cast crank,Scat H beam rods (20runs),KB floating dome pistons,12.5comp with 0.060"copper head gaskets,SuperMag 3.2amp fresh with new leads(10runs),Kevco 8L sportsman pan, HV oil pump,Stahl hedders coated with x1 O2 sensor fitting x8 EGT fittings, 1.9hp reduction starter. Arp hardware in motor,fibreglass scoop,system1 oil filter,GZ Motorsports Vac pump.
Powerglide trans 900hp rated, just freshened up after 50 passes(no issues),trans brake,turbo input shaft,Converter shop T400 5500 stall converter-fresh inspected after 30 passes(no issues),Tci scatter shield,SFI JW Ultra bell+the Wheel flywheel(external balance).
Altronics DataQuest logger- Engine rpm/diff rpm/O2 sensor x1/G meter/oil pressure/volts/ vacuum sensor complete with wiring loom to motor.
optional extras- x2 spare pistons (L/R), ETC Inc 3 stage rev limiter suit supermag, Autometer ProComp gauges- oil pressure,oil temp,fuel pressure,2 speed shifter+cable.