Some free bits n pieces, maybe someone has a need for them. Only for people who do actually need them , thanks.
Email for pictures if you are interested
Valiant armrest large Philips screws and the screw retainers (inside door), two are used per door. If you don't have these it is difficult to find the correct gauge and length etc, otherwise you have to buy them. Several pairs available - Free
Vf Vg Hardtop rear window mechanism chassis. Two available. These are the aluminium frame that the glass screws into and the pivots ride in. Free.
Door lock knobs. These are from earlier (VE-VG) models but probably fit later also. Black plastic. These go missing and it has now been revealed that kids screw them off and eat them when no-one is watching. Around 4 available. Free
VC Regal LH rear door vertical strut, stainless very good.
VE-VF-VG Ute Tail light lense (LH). Has a small chunk out of it at bottom which has been filled with something. Otherwise in perfect cond, still solid. Not really noticeable from 5m If you don't want to pay $100 for one, get some Araldite or buy some resin and clean up the hole and repair it. Or use as is. Free.
Send email for more photos
Set of 4 NOS brush springs for the Chrysler reduction gear starter motors. Ideal if rebuilding one, these will give correct pressure on the rotor $10 includes postage *Sold
Sunvisor spear, the pivot hinge thingy (3" spear) Vg on, maybe earlier Not seized, argent paint still presentable $5 Not sure what side, part number is 3545152
Arm rests (pair) need recovering $50 price includes some nice new black period style vinyl with the similar grain. Easy to do yourself with care and patience.
VE-Vf VG Steering column auto linkages. Looks like most or all of the linkages down to transmission. With bushes, torque-bar and assoc parts. Totally clean. $50. Can get pics if required.
VK-CM blank steering column (blue) with steering wheel (from Regal) and good horn switch. Inner column is from earlier model (no ign lock tab) but will work ok. Comes with multi indic /light stalk (CM) in top cond. Also has the small wiring cover plate that always goes missing. $120. If you think that's too much, see what the clowns are asking on ebay.
VH-CM ute / wagon side marker lenses and bezels/wiring etc. Top cond, as new, no scratches, screw straight on $60 pair * Sold.
Vf Vg hardtop rear side marker bezels, original OEM (no lenses). $60 pair
VG Valiant front indicator bucket $25
VF grille mount (centre section grille to chassis) often rust out or lost $25
Vf vg Hardtop outer door handle, driver side only. Great driver condition $25
Power steering Pitman arm New in box, suit VE-CL, some CM Good quality unit $25
Hardtop kickpanels, original black plastic, good cond but have speaker holes (4.5"). $45 pair I have some new 5" black speaker grills, low profile to go over them if required.
Hardtop sill entry trim pressings (scuff plates) reasonable driver quality pair $50 as is, or $60 polished (new are between $170-$190)
Hardtop rear bezel set, will screw on ok and straight but not perfect; ok for a driver or to paint or restore if you have the skill. $45 pair Email for photos
Hardtop trunk mat - new USA style plaid vinyl, has been cut to fit my hardtop trunk floor, but is basically new. Cost around $90 to get here. $30
BW diff covers - 1 x restored (slight surface rust inside) with filler screw $30.
1 x as pulled, also has filler screw $20
VJ on - window winder handles $10 ea.
Vg on - inner door handles, standard and Regal $15-20 a pair
318 -360 exhaust manifolds - later style with the heat control (working). $45 pair
New Moroso header wrap, 2"wide x 100ft long (32m). Enough to do a set of V8 headers. $90 (Cost around $165-175 from the US. ). This is the real stuff, not the wannabe Asian cheap stuff.
Description from the website: Moroso insulating header wraps are designed to reduce underhood temperatures while producing more horsepower. Made from a silica-based formula that contains no asbestos, they can withstand up to 1,200 degrees F of continuous heat
Email for photos